Categories
- Stainless Steel Tubing Coil (20)
- Seamless Stainless Steel Tubing (42)
- Stainless Steel Welded Pipe (13)
- Stainless Steel Pipe Fittings (25)
- Duplex Stainless Steel Pipe (7)
- Sanitary Stainless Steel Pipe (10)
- Forged Socket Pipe Fittings (6)
- Stainless Steel Flanges (12)
- Nickel Alloy Steel Pipe (19)
- Forged Thread Pipe Fittings (11)
- Stainless Steel Olets (3)
Monel 400 / EN 2.4360 Nickel Alloy Pipe
Monel alloy 400 (UNS N04400-28-1.5-1.8 or Ni68Cu28Fe or MCu) is a water, chemical solvents, ammonia, chlorine, hydrogen chloride, sulfur acid medium such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, organic acid,
- Product Details
Monel alloy 400 (UNS N04400-28-1.5-1.8 or Ni68Cu28Fe or MCu) is a water, chemical solvents, ammonia, chlorine, hydrogen chloride, sulfur acid medium such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, organic acid, in alkaline medium, salt, and molten salt has good corrosion resistance of nickel base alloy material
Application :
Monel 400 is mainly used in chemistry, petrochemical and Marine development.Can be used to manufacture all kinds of heat exchange equipment, boiler feed water heater, oil and chemical pipeline, container, tower, tank, valve, pump, reaction kettle, shaft, etc.
Monel 400 International brand:
| USA | GE | UK | FR | |
| UNS | SEW VDIUV | BS | AFNOR | |
| Monel 400 | N04400 | W.Nr.2.4360 NiCu30Fe | NA 12 | Nu 30 |
Chemical Composition:
| Grade | Ni% | Cu% | Fe% | Mn% | C% | Si% | S% |
| Monel 400 | Min 63 | 28-34 | Max 2.5 | Max 2.0 | Max 0.3 | Max 0.5 | Max 0.024 |
Physical Properties:
| Grade | Density | Melting Point |
| Monel 400 | 8.83 g/cm3 | 1300°C-1390°C |
Mechanical Properties:
| Alloy | Tensile Strength (Rm N/mm2) | Yield strength (RP0.2N/mm2) | Elongation (A5 %) | HB |
| Monel400 | 480 | 170 | 35 | ≥331 |
Production Standard:
| Bar | Forging | Pipe | Sheet/Strip | Welding Wire | |
| Standard | ASTM B164 | ASTM B564 | ASTM B165 | ASTM B127 | ERNiCu-7ERNiCu-7 |
Welding :
The welding performance of monel 400 is good. TIG and MIG method can be adopted.Or manual arc welding and submerged arc welding;It can be welded with carbon steel and low alloy steel.
