How do manufacturers explain the magnetic problems of stainless steel pipes?

The austenitic stainless steel pipe is non-magnetic or weakly magnetic, and the martensitic or ferritic stainless steel tube is magnetic.

Most of the stainless steels used for decorative tube sheets are austenitic 304 materials, which are generally non-magnetic or weakly magnetic. However, magnetic properties may occur due to fluctuations in chemical composition or processing conditions due to smelting, but this cannot be considered as Counterfeit or unqualified, what is the reason?

The austenitic stainless steel pipe mentioned above is non-magnetic or weakly magnetic, while martensite or ferrite is magnetic. Due to segregation or improper heat treatment during smelting, a small amount of martensite in austenitic 304 stainless steel or Ferrite organization. Thus, 304 stainless steel will have weak magnetic properties.

In addition, 304 stainless steel is cold-worked, and the microstructure is also transformed into martensite. The greater the cold work deformation, the more martensite transformation and the greater the magnetic properties of the steel. Like a batch of steel strips, it produces Φ76 tubes with no obvious magnetic induction and produces Φ9.5 tubes. Due to the large deformation of the bending, the magnetic induction is obvious. The rectangular tube produced is larger than the round pipe, especially the angled part, and the deformation is more intense and the magnetic is more obvious.

In order to completely eliminate the magnetic properties of the 304 steel caused by the above reasons, the austenite structure can be restored by high-temperature solution treatment to eliminate the magnetic properties.

In particular, the magnetic properties of 304 stainless steel caused by the above reasons are not at the same level as the magnetic properties of other materials such as 430 and carbon steel. That is to say, the magnetic properties of 304 steel always show weak magnetic properties. This tells us that if the stainless steel strip is weakly magnetic or not magnetic at all, it should be judged as 304 or 316 material; if it is the same as the magnetic steel, it shows strong magnetism, because it is judged not to be 304 material.

We recommend that the purchase of stainless steel pipe products should be selected from reputable manufacturers' products, not to be cheap, beware of being fooled. the below for stainless steel pipe packing